Command:

mls rp vtp-domain


Mode:

Router(config-if)#

Syntax:

mls rp vtp-domain domain-name

Syntax Description:

domain-name

VTP domain name


Command Description:

To select the router interface to be Layer 3 switched and then add that interface to a VLAN Trunking Protocol (VTP) domain, use the mls rp vtp-domain interface configuration command.

This command is required only if the Catalyst switch is in a VTP domain. For an ISL interface, you can enter this command only on the primary interface. All subinterfaces that are part of the primary interface inherit the primary's VTP domain.


Example:

The following example adds the interface to the engineering VTP domain:

Router(config-if)#mls rp vtp-domain engineering

Misconceptions:
None

Related Commands:
mls rp ip
mls rp vlan-id
mls rp management-interface

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)