Command:

mls rp management-interface


Mode:

Router(config-if)#

Syntax:

mls rp management-interface

no mls rp management-interface


Syntax Description:

This command has no arguments or keywords.


Command Description:

To designate an interface as the management interface for MLSP packets, use the mls rp management-interface interface configuration command. Use the no version of the command to remove an interface as the management interface.

Use this command to designate an interface as the MLSP management interface. You must specify a router interface as a management interface. If you do not specify an interface, MLSP packets will not be sent or received.

The management interface can be any MLS interface connected to the Catalyst 5000 series switch. Specifying more than one interface is not necessary.


Example:

The following example sets the current interface as the management interface:

Router(config-if)#mls rp management-interface

Misconceptions:
None

Related Commands:
mls rp ip
mls rp vlan-id
mls rp vtp-domain

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)