Command:

linecode


Mode:

Router(config-controller)#

Syntax:

linecode {ami | b8zs | hdb3}

no linecode


Syntax Description:

ami

Specifies alternate mark inversion (AMI) as the line-code type. Valid for T1 or E1 controllers; the default for T1 lines.

b8zs

Specifies B8ZS as the line-code type. Valid for T1 controller only.

hdb3

Specifies high-density bipolar 3 (hdb3) as the line-code type. Valid for E1 controller only; the default for E1 lines.


Command Description:

Use the linecode controller configuration command to select the line-code type for the T1 or E1 line. Use the no form of the command to restore the default.


Example:

The following example specifies B8ZS as the line-code type for a T1 line:

Router(config)#controller t1 1/0
Router(config-controller)#linecode b8zs
  

Misconceptions:
None

Related Commands:
None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)