Command:

isdn spid2


Mode:

Router(config-if)#

Syntax:

isdn spid2 spid-number [ldn] [ldn2] [ldn3] ... [ldn]

no isdn spid2


Syntax Description:
spid-number Number identifying the service to which you have subscribed. This value is assigned by the ISDN service provider and is usually a 10-digit telephone number with additional digits such as 40855522220101.
ldn (Optional) Local directory number (LDN), which is a 7-digit number assigned by the service provider. This information is delivered by the switch in the incoming setup message. If you include the local directory number in the no form of this command, access to the switch is permitted, but the other B channel may not be able to receive incoming calls.

Command Description:

Use the isdn spid2 interface configuration command on the router to define the service profile identifier (SPID) number that has been assigned by the ISDN service provider for the B2 channel. This value is assigned by the ISDN service provider and is usually a 10-digit telephone number with additional digits. Use the no form of this command to disable the specified SPID, thereby preventing access to the switch. LDN is an optional Local directory number, which is a 7-digit number assigned by the service provider. This information is delivered by the switch in the incoming setup message.

Example:
Router(config)#interface bri 0/0
Router(config-if)#isdn spid2 28393027598234 3937439

Misconceptions:
None

Related Commands:
isdn spid1
isdn switch-type

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)