Command:

ip rip send version


Mode:

Router(config-if)#


Syntax:

ip rip send version [1] [2]
no ip rip send version

 

Syntax Description:

1 (Optional) Sends only RIP Version 1 packets out the interface.
2 (Optional) Sends only RIP Version 2 packets out the interface.

 

Command Description:

To specify a Routing Information Protocol (RIP) version to send on an interface basis, use the ip rip send version command in interface configuration mode. To follow the global version rules, use the no form of this command.

The default is to send version 1 or version configured by the version command.

Use this command to override the default behavior of RIP as specified by the version command. This command applies only to the interface being configured.


Example:

The following example configures the interface to send both RIP Version 1 and Version 2 packets out the interface:

Router(config-if)# ip rip send version 1 2

The following example configures the interface to send only RIP Version 2 packets out the interface:

Router(config-if)# ip rip send version 2


Misconceptions:

None


Related Commands:


ip rip receive version
show ip protocols
version

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)