no ip redirects
This command has no arguments or keywords.
To enable the sending of Internet Control Message Protocol (ICMP) redirect messages if the Cisco IOS
software is forced to resend a packet through the same interface on which it was received, use the ip
redirects interface configuration command. To disable the sending of redirect messages, use the no form
of this command.
Previously, if the Hot Standby Router Protocol (HSRP) was configured on an interface, ICMP redirect
messages were disabled by default for the interface. With Cisco IOS Release 12.1(3)T, ICMP redirect
messages are enabled by default if HSRP is configured.
The following example enables the sending of ICMP redirect messages on Ethernet interface 0:
interface ethernet 0
� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education
|Converted from CHM to HTML with chm2web Pro 2.85 (unicode)|