Command:

ip ospf priority


Mode:

Router(config-if)#


Syntax:

ip ospf priority number


Syntax Description:
number  8-bit unsigned integer that specifies the priority. The range is from 0 to 255.

Command Description:

To set the router priority, which helps determine the designated router for this network, use the ip ospf priority interface configuration command. To return to the default value, use the no form of this command.


Example:
Router(config-if)#ip ospf priority  100

Misconceptions:
None

Related Commands:
None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)