Command:

ip ospf network


Mode:

Router(config-if)#


Syntax:

ip ospf network {broadcast  | non-broadcast  | {point-to-multipoint [non-broadcast ]}}

no ip ospf network


Syntax Description:
broadcast Sets the network type to broadcast
non-broadcast Sets the network type to NBMA
point-to-multipoint Sets the network type to point-to-multipoint
non-broadcast

Sets the point-to-multipoint network to be nonbroadcast. If you use the non-broadcast keyword, the neighbor command is required.

Command Description:

To configure the OSPF network type to a type other than the default for a given media, use the ip ospf network interface configuration command. To return to the default value, use the no form of this command.


Example:
Router(config-if)#ip ospf network non-broadcast

Misconceptions:
None

Related Commands:
None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)