Command:

ip ospf dead-interval


Mode:

Router(config-if)#


Syntax:

ip ospf dead-interval seconds

no ip ospf dead-interval


Syntax Description:
 seconds Length of the ospf dead interval in seconds

Command Description:

To set how long hello packets must not have been seen before its neighbors declare the router down, use the ip ospf dead-interval interface configuration command.


Example:
Router(config-if)#ip ospf dead-interval  60

Misconceptions:
None

Related Commands:
None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)