Command:

ip ospf database-filter all out


Mode:

Router(config-if)#


Syntax:

ip ospf database-filter all out
no ip ospf database-filter all out

 

Syntax Description:

This command has no arguments or keywords.

 

Command Description:

To filter outgoing link-state advertisements (LSAs) to an OSPF interface, use the ip ospf database-filter all out command in interface configuration mode. To restore the forwarding of LSAs to the interface, use the no form of this command.

This command performs the same function that the neighbor database-filter command performs on a neighbor basis.

This command is disabled by default. All outgoing LSAs are flooded to the interface.


Example:

The following example prevents flooding of OSPF LSAs to broadcast, nonbroadcast, or point-to-point networks reachable through Ethernet interface 0:

Router(config-if)#interface ethernet 0
Router(config-if)#ip ospf database-filter all out


Misconceptions:

None


Related Commands:

neighbor database-filter

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)