Command:

ip ospf cost


Mode:

Router(config-if)#

Syntax:

ip ospf cost cost

no ip ospf cost


Syntax Description:
cost Unsigned integer value expressed as the link state metric. It can be a value in the range 1 to 65535.

Command Description:

To explicitly specify the cost of sending a packet on an interface, use the ip ospf cost interface configuration command. To reset the path cost to the default value, use the no form of this command.


Example:
Router(config-if)#ip ospf cost  65
  

Misconceptions:
None

Related Commands:
None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)