Command:

ip bandwidth-percent eigrp


Mode:

Router(config-if)#

 

Syntax:

ip bandwidth-percent eigrp as-number percent

no ip bandwidth-percent eigrp as-number percent

Syntax Description:

 

as-number Autonomous system number.
percent Percent of bandwidth that Enhanced IGRP may use

Command Description:

To configure the percentage of bandwidth that may be used by EIGRP on an interface, use the ip bandwidth-percent eigrp interface configuration command.


Example:
Router(config-if)#ip bandwidth-percent eigrp 209 75

Misconceptions:
None

Related Commands:
None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)