Command:

interface group-async


Mode:

Router(config)#

Syntax:

interface group-async unit-number

no interface group-async unit-number


Syntax Description:

unit-number

The number of the asynchronous group interface being created.


Command Description:

To create a group interface that will serve as master, to which asynchronous interfaces can be associated as members, use the interface group-async global configuration command. Use the no form of the command to restore the default.

Using the interface group-async command, you create a single asynchronous interface to which other interfaces are associated as members using the group-range command. This one-to-many configuration allows you to configure all associated member interfaces by entering one command on the group master interface, rather than entering this command on each individual interface. You can create multiple group masters on a device. However, each member interface can only be associated with one group.

Example:

The following example defines asynchronous group master interface 0:

Router(config)#interface group-async 0

Misconceptions:
None

Related Commands:
group-range

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)