Command:

frame-relay traffic-shaping

Mode:

Router(config-if)#


Syntax:

frame-relay traffic-shaping

no frame-relay traffic-shaping


Syntax Description:

This command has no arguments or keywords.

Command Description:

To enable both traffic shaping and per-virtual circuit queuing for all PVCs and SVCs on a Frame Relay interface, use the frame-relay traffic-shaping interface configuration command. To disable traffic shaping and per-virtual circuit queuing, use the no form of this command.

Usage Guidelines

For virtual circuits for which no specific traffic shaping or queuing parameters are specified, a set of default values are used. The default queuing is performed on a first-come-first-served basis.

Frame Relay traffic shaping is not effective for Layer 2 PVC switching using the frame-relay route command.

Example:

The following example enables both traffic shaping and per-virtual circuit queuing:

Router(config-if)#frame-relay traffic-shaping

Misconceptions:
None

Related Commands:
frame-relay class
frame-relay custom-queue-list
frame-relay priority-group
frame-relay traffic-rate
map-class frame-relay

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)