Command:

frame-relay priority-group


Mode:

Router(config-map-class)#

Syntax:

frame-relay priority-group list-number

no frame-relay priority-group list-number

Syntax Description:

list-number 

Priority-list number to be associated with the specified map class


Command Description:

To assign a priority queue to virtual circuits associated with a map class, use the frame-relay priority-group map-class configuration command. To remove the specified queuing from the virtual circuit and cause it to revert to the default first-come-first-served queuing, use the no form of this command.

Definition of the priority queue takes place in the existing manner (through priority-list commands).

Because only one form of queuing can be associated with a particular map class, subsequent definitions overwrite previous ones.


Example:

The following example configures a map class for a specified DLCI, specifies a priority list for the map class, and then defines the priority list:

 Router(config)#interface serial 0/0
 Router(config-if)#encapsulation frame-relay
 Router(config-if)#frame-relay interface-dlci 100 class pri_vc

 Router(config)#map-class frame-relaypri_vc
 Router(config-map-class)#frame-relay priority-group 1 priority-list 1 protocol ip high

Misconceptions:
None

Related Commands:
frame-relay interface-dlci
map-class frame-relay

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)