Command:

frame-relay cir


Mode:

Router(config-map-class)#

Syntax:

frame-relay cir {in | out} bps

no frame-relay cir {in | out} bps

 

Syntax Description:

in Specifies incoming cir
out Specifies outgoing cir
bps CIR in bits per second

Command Description:

To specify the incoming or outgoing committed information rate (CIR) for a Frame Relay virtual circuit, use the frame-relay cir map-class configuration command. To reset the CIR to the default, use the no form of this command.


Example:

The following example sets a higher committed information rate for incoming traffic than for outgoing traffic (which is going out on a slow WAN line):

Router(config-map-class)#frame-relay cir in 2000000
Router(config-map-class)#frame-relay cir out 9600

Misconceptions:
None

Related Commands:
frame-relay traffic-rate
frame-relay bc
frame-relay be

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)