Command:

exec-timeout


Mode:

Router(config-line)#

 

Syntax:

 

exec-timeout minutes [seconds]

no exec-timeout

 

Syntax Description:

 

minutes

Integer that specifies the number of minutes

seconds

(Optional) Additional time intervals in seconds

 

Command Description:

To set the interval that the EXEC command interpreter waits until user input is detected, use the exec-timeout line configuration command.  To remove the timeout definition, use the no form of this command.

If no input is detected during the interval, the EXEC facility resumes the current connection. If no connections exist, the EXEC facility returns the terminal to the idle state and disconnects the incoming session. To specify no timeout, enter the exec-timeout 0 0 command.


Examples:

The following example sets a time interval of 2 minutes, 30 seconds:

Router(config)#line console
Router(config-time)#exec-timeout 2 30

The following example sets a time interval of 10 seconds:
Router(config)#line console
Router(config)#exec-timeout 0 10


Misconceptions:

 

None


Related Commands:

 

None

 


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)