Command:

eigrp log-neighbor-warnings


Mode:

Router(config-router)#


Syntax:

eigrp log-neighbor-warnings [seconds]
no eigrp log-neighbor-warnings

 

Syntax Description:

seconds (Optional) The time interval (in seconds) between repeated neighbor warning messages. The range of seconds is from 1 to 65535.

 

Command Description:

To enable the logging of Enhanced IGRP (EIGRP) neighbor warning messages, use the eigrp log-neighbor-warnings command in router configuration mode. To disable the logging of EIGRP neighbor warning messages, use the no form of this command.

Default: Neighbor warning messages are logged.

When neighbor warning messages occur, they are logged by default. With this command, you can disable and enable neighbor warning messages, and configure the interval between repeated neighbor warning messages.


Example:

The following command will log neighbor warning messages for EIGRP process 209 and repeat the warning messages in 5-minute (300 seconds) intervals:

Router(config)#router eigrp 209
Router(config-router)#eigrp log-neighbor-warnings 300


Misconceptions:

None


Related Commands:

None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)