Command:  

dsl operating-mode


Mode:

Router(config-if)#

Syntax:

dsl operating-mode {auto | ansi-dmt | itu-dmt | splitterless}

no dsl operating-mode {auto | ansi-dmt | itu-dmt}

Syntax Description:

auto

Configures the ADSL line after auto-negotiating with the DSL access multiplexer (DSLAM) located at the central office. This is the default operating mode.

ansi-dmt

Configures the ADSL line to use the ANSI T1.413 Issue 2 mode.

itu-dmt

Configures the ADSL line to use the G.992.1 mode.

splitterless

Configures the ADSL line to use the G.992.2 (G.lite) mode.

Command Description:

To modify the operating mode of the digital subscriber line for an ATM interface, use the dsl operating-mode command in interface configuration mode. To reset the operating mode to the default, use the no form of this command.


Example:

In the following example, the ADSL line is configured to use the G.992.1 mode:

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface atm 0

Router(config-if)#dsl operating-mode itu-dmt

Router(config-if)#end


Misconceptions:

None


Related commands:

None

� Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)