Command:  

dialer watch-group


Mode:

Router(config-if)#


Syntax:

dialer watch-group group-number

no dialer watch-group group-number

Syntax Description:

group-number

Group number assigned that will point to a globally defined list of IP addresses to watch. The valid range is 1 to 255.

Command Description:

To enable dial-on-demand routing (DDR) backup on an interface using Dialer Watch, apply a dialer list to the interface with the dialer watch-group command. To disable this feature, use the no form of this command.


Example:

The following example configures BRI interface 0 as the backup interface:

interface bri 0

ip address 10.1.1.2 255.255.255.0

encapsulation ppp

dialer watch-group 1


Misconceptions:

None


Related commands:

dialer watch-list
dialer watch-disable

� Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)