Command:  

dialer watch-disable


Mode:


Router(config-if)#


Syntax:

dialer watch-disable timeout

no dialer watch-disable

Syntax Description:

timeout

The timeout value in seconds.

Command Description:

Dialer Watch activates a DDR connection when one or more user-specified routes are removed from a router's routing table. Use the dialer watch-disable command to instruct a router to wait for a specified number of seconds after the route is reinserted into the routing table before bringing down the backup connection.


Example:

The following example forces a 6-second delay to the backup interface once the primary interface recovers:

Router(config)#interface bri0

Router(config-if)#ip address 10.1.1.2 255.255.255.0

Router(config-if)#encapsulation ppp

Router(config-if)#dialer map ip 10.3.1.1 255.255.255.0 name hubble 5551234

Router(config-if)#dialer-group 1

Router(config-if)#dialer watch-group 1

Router(config-if)#dialer watch-disable 6

Misconceptions:

None


Related commands:

dialer watch-list
dialer watch-group

� Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)