Command:

dialer map

Mode:

Router(config-if)#


Syntax:

dialer map protocol next-hop-address [name hostname] [spc ] [speed 56 | speed 64 ] [broadcast ] [modem-script modem-regexp] [system-script system-regexp] [dial-string [: isdn-subaddress]]

no dialer map protocol next-hop-address [name hostname] [spc ] [speed 56 | speed 64 ] [broadcast ] [modem-script modem-regexp] [system-script system-regexp] [dial-string [: isdn-subaddress]]

Syntax Description:

protocol

Protocol keywords; one of the following: appletalk, bridge, clns, decnet, ip, ipx, novell, snapshot, vines, and xns
 

next-hop-address

Protocol address used to match against addresses to which packets are destined

name

(Optional) Indicates the remote system with which the local router or access server communicates. Used for authenticating the remote system on incoming calls.

hostname

(Optional) Case-sensitive name or ID of the remote device (usually the host name). For routers with ISDN interfaces, if calling line identification sometimes called CLI, but also known as caller ID and automatic number identification (ANI) is provided, the hostname field can contain the number that the calling line ID provides.

spc

(Optional) Specifies a semipermanent connection between customer equipment and the exchange; used only in Germany for circuits between an ISDN BRI and a 1TR6 ISDN switch and in Australia for circuits between an ISDN PRI and a TS-014 switch.

speed 56 | speed 64

(Optional) Keyword and value indicating the line speed in kilobits per second to use. Used for ISDN only. The default speed is speed 64 (64 kbps).

broadcast 

 (Optional) Indicates that broadcasts should be forwarded to this protocol address

modem-script

 (Optional) Indicates the modem script to be used for the connection (for asynchronous interfaces)

modem-regexp

(Optional) Regular expression to which a modem script will be matched (for asynchronous interfaces)

system-script

(Optional) Indicates the system script to be used for the connection (for asynchronous interfaces

system-regexp

(Optional) Regular expression to which a system script will be matched (for asynchronous interfaces)

dial-string [:isdn-subaddress]

(Optional) Telephone number sent to the dialing device when it recognizes packets with the specified next hop address that matches the access lists defined, and the optional subaddress number used for ISDN multipoint connections. The dial string and ISDN subaddress, if used, must be the last item in the command line.

 


Command Description:

To configure an ISDN interface to place a call to multiple sites, or to authenticate calls from multiple sites, use the dialer map interface configuration command. Similar to the function provided by an ARP table, dialer map statements translate next-hop protocol addresses to telephone numbers. Use the no form of this command to reset the ISDN interface dialer map configuration.


Example:

In the following example, packets received for a host 10.0.0.1 (HQ-central) is statically mapped to telephone number 555-1212:

Router(config)#interface bri 0/0
Router(config-if)#dialer map ip 10.0.0.1 name HQ-central broadcast 2330038283


Misconceptions:

 

None


Related Commands:

 

dialer-list protocol

 


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)