Command:  

dialer callback-server


Mode:

Router(config-if)#


Syntax:

dialer callback-server [username | dialstring]

no dialer callback-server

Syntax Description:

username

(Optional) Looks up the authenticated host name in a dialer map command. This is the default.

dialstring

(Optional) Identifies the return call during callback negotiation.

Command Description:

To enable an interface to make return calls when callback is successfully negotiated, use the dialer callback-server command in interface configuration mode. To disable return calls, use the no form of this command.


Example:

The following partial example configures BRI 0 to function as the callback server on the shared network:

interface BRI0

ip address 172.19.1.9 255.255.255.0

encapsulation ppp

dialer callback-secure

dialer enable-timeout 2

dialer map ip 172.19.1.8 name atlanta class dial1 81012345678901

dialer-group 1

ppp callback accept

ppp authentication chap

!

map-class dialer dial1

dialer callback-server username

Misconceptions:

None


Related commands:

dialer callback-secure
dialer map
ppp callback

� Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)