Command:

debug ntp


Mode:

Router#


Syntax:

debug ntp {adjust | authentication | events | loopfilter | packets | params | refclock | select | sync | validity}

no debug ntp {adjust | authentication | events | loopfilter | packets | params | refclock | select | sync | validity}

 

Syntax Description:

adjust Displays debugging information on NTP clock adjustments.
authentication Displays debugging information on NTP authentication.
events Displays debugging information on NTP events.
loopfilter Displays debugging information on NTP loop filters.
packets Displays debugging information on NTP packets.
params Displays debugging information on NTP clock parameters.
refclock Displays debugging information on NTP reference clocks
select Displays debugging information on NTP clock selection.
sync Displays debugging information on NTP clock synchronization.
validity Displays debugging information on NTP peer clock validity.

 

Command Description:

To display debug messages for Network Time Protocol (NTP) features, use the debug ntp command. To stop the output of ntp debugging messages, use the no form of this command.


Example:

The following example displays the system output when the debug ntp  command is issued:

Switch# debug ntp


Misconceptions:

None


Related Commands:

None


© Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)