Command:

debug ip ospf mpls traffic-eng advertisements


Mode:

Router#


Syntax:

debug ip ospf mpls traffic-eng advertisements

no debug ip ospf mpls traffic-eng advertisements

 

Syntax Description:

This command has no arguments or keywords.

 

Command Description:

To print information about traffic engineering advertisements in OSPF link state advertisement (LSA) messages, use the debug ip ospf mpls traffic-eng advertisements privileged EXEC command. To disable debugging output, use the no form of this command.


Example:

In the following example, information about traffic engineering advertisements is printed in OSPF LSA messages:

Router#debug ip ospf mpls traffic-eng advertisements
OSPF:IGP delete router node 10.106.0.6 fragment 0 with 0 links
TE Router ID 10.106.0.6
OSPF:IGP update router node 10.110.0.10 fragment 0 with 0 links
TE Router ID 10.110.0.10
OSPF:MPLS announce router node 10.106.0.6 fragment 0 with 1 links
Link connected to Point-to-Point network
Link ID :10.110.0.10
Interface Address :10.1.0.6
Neighbor Address :10.1.0.10
Admin Metric :10
Maximum bandwidth :1250000
Maximum reservable bandwidth :625000
Number of Priority :8
Priority 0 :625000 Priority 1 :625000
Priority 2 :625000 Priority 3 :625000
Priority 4 :625000 Priority 5 :625000
Priority 6 :625000 Priority 7 :625000
Affinity Bit :0x0


Misconceptions:

None.


Related Commands:

None.


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)