Command:

debug all


Mode:

Router#

Syntax:

debug all

no debug all


Syntax Description:

This command has no arguments or keywords.

Command Description:

To enable all system diagnostics, enter the debug all command in privileged EXEC mode. The no debug all command turns off all diagnostic output. Using the no debug all command is a convenient way to ensure that you have not accidentally left any debug commands turned on. Debugging output takes priority over other network traffic, and because the debug all command generates more output than any other debug command, it can severely diminish the router's performance or even render it unusable. In virtually all cases, it is best to use more specific debug commands.


Example:
Router#debug all
This may severely impact network performance. Continue? [confirm]
All possible debugging has been turned on
  

Misconceptions:

None

Related Commands:
debug ip ospf
show ip ospf
debug ppp

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)