no custom-queue-list [list]
Any number from 1 to 16 for the custom queue list.
To assign a custom queue list to an interface, use the custom-queue-list interface configuration command. To remove a specific list or all list assignments, use the no form of this command.
Only one queue list can be assigned per interface. Use this command in place of the priority-list command (not in addition to it). Custom queueing allows a fairness not provided with priority queueing. With custom queueing, you can control the interface's available bandwidth when it is unable to accommodate the aggregate traffic enqueued. Associated with each output queue is a configurable byte count, which specifies how many bytes of data should be delivered from the current queue by the system before the system moves on to the next queue. When a particular queue is being processed, packets are sent until the number of bytes sent exceeds the queue byte count or until the queue is empty.
Use the show queueing custom and show interfaces commands to display the current status of the custom output queues.
In the following example, custom queue list number 3 is assigned to serial interface 0:Router(config)#interface serial 0 Router(config-if)#custom-queue-list 3
|queue-list queue byte-count|
|queue-list queue limit|
� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education
|Converted from CHM to HTML with chm2web Pro 2.85 (unicode)|