Command:

configure


Mode:

Router#


Syntax:

configure {terminal | memory | network | overwrite-network}


Syntax Description:

terminal

Enters global configuration mode to allow you to configure the system from the terminal.

network

Configure from a TFTP network host

overwrite-network

Overwrite NVRAM from TFTP network host

memory

Configures the system with the commands found in the default NVRAM configuration file.

For the Class A Flash file system platforms, configures the system with the configuration file specified by the CONFIG_FILE environment variable.

 

Command Description:

This command is used to switch from enable mode to one of the configuration modes.


Example:

The following will put the router into the configuration mode with the changes being done through the terminal session.    

 

Router#configure terminal

Router(config)#


Misconceptions:

 

None


Related Commands:

 

exit

 


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)