Command:

cdp enable


Mode:

Router(config-if)#


Syntax:

cdp enable

no cdp enable

 

Syntax Description:

This command has no arguments or keywords.


Command Description:

 

To enable Cisco Discovery Protocol (CDP) on an interface, use the cdp enable interface configuration command. Use the no form of this command to disable CDP on an interface. CDP is enabled by default on all supported interfaces.

 

Example:

 

The following commands enables CDP on serial 0/0: 

 

Router(config)#interface serial 0/0 
Router(config-if)#cdp enable


Misconceptions:

 

None


Related Commands:

 

show cdp neighbors

 

show cdp

 

cdp run

 

 

 


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)