Command:

bgp default ipv4-unicast


Mode:

Router(config-router)#
Router(config-router-af)#


Syntax:

bgp default ipv4-unicast
no bgp default ipv4-unicast

 

Syntax Description:

This command has no arguments or keywords.

 

Command Description:

To enable the IP version 4 (IPv4) unicast address family on all neighbors, use the bgp default ipv4-unicast command in address family or router configuration mode. To disable the IPv4 unicast address family on all neighbors, use the no form of this command.

Use the neighbor activate address family configuration command for each neighbor you want to run the bgp default ipv4-unicast command for under the IPv4 unicast address family.


Example:

The following example enables IP version 4 unicast address family on all neighbors:

Router(config-router)# bgp default ipv4-unicast


Misconceptions:

None


Related Commands:

None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)