bgp confederation peers




bgp confederation peers as-number [... as-number]

no bgp confederation peers as-number [... as-number]


Syntax Description:


Autonomous system numbers for BGP peers that will belong to the confederation.


Command Description:

To configure the autonomous systems that belong to the confederation, use the bgp confederation peers command in router configuration mode. To remove an autonomous system from the confederation, use the no form of this command.

By default, no BGP peers are identified as belonging to the confederation.

An ellipsis (...) in the command syntax indicates that your command input can include multiple values for the as-number argument.

The autonomous systems specified in this command are visible internally to a confederation. Each autonomous system is fully meshed within itself. The bgp confederation identifier command specifies the confederation to which the autonomous systems belong.


The following example specifies that autonomous systems 1090, 1091, 1092, and 1093 belong to a single confederation:

Router(config)#router bgp 1090
Router(config-router)#bgp confederation peers 1091 1092 1093



Related Commands:

bgp confederation identifier

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)