Command:

autoselect

Mode:

Router(config-line)#


Syntax:

autoselect { arap | ppp | slip | during-login | timeout }

no autoselect { arap | ppp | slip | during-login | timeout}

 

Syntax Description:

arap

Configures the Cisco IOS software to allow an ARAP session to start up automatically.

ppp

Configures the Cisco IOS software to allow a PPP session to start up automatically.

slip

Configures the Cisco IOS software to allow a SLIP session to start up automatically.

timeout

Set wait timeout for initial autoselect byte

during-login

The username and/or password prompt is displayed without pressing the Return key. After the user logs in, the autoselect function begins.

 

Command Description:

 

To configure a line to start an ARA, PPP, or SLIP session, use the autoselect line configuration command. Use the no form of this command to disable this function on a line.


Example:

 

The following will provide a PPP session when PPP headers are detected. 

Router(config-line)#autoselect ppp


Misconceptions:

 

None


Related Commands:

 

async

 


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)