Command:

absolute


Mode:

Router(config-time-range)#


Syntax:

absolute [start time date] [end time date]

no absolute

 

Syntax Description:

This command has no arguments or keywords.

Command Description:

To specify an absolute time when a time range is in effect, use the absolute time-range configuration command. To remove an absolute time-range, use the no form of the command.

 

Note All time specifications are interpreted as local time. To ensure that the time range entries take effect at the desired times, the software clock should be synchronized using the Network Time Protocol (NTP), or some other authoritative time source.


Example:

The following example defines a time range from 8:00 December 18, 2002 until 8:00 January 3, 2003:

 

Router(config-time-range)#absolute 8:00 18 december 2002 8:00 3 january 2003


Misconceptions:

 

None


Related Commands:

 

ip access-list extended

 

access-list

 

periodic

 

time-range

 


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)